TROUBLE SHOOTING
POSSIBLE CAUSE
SOLUTION
Driving the UTV onto a pickup or tall
trailer in high range.
Shift transmission to low range during loading of the
UTV to prevent belt burning.
Starting out going up a steep
incline.
When starting out on an incline, use low range or
dismount the UTV (after first applying the park brake)
and perform the K‐turn as described on page 82.
Driving at low RPM or low ground
speed(at approximately 5‐10 km/h).
Drive at a higher speed or use low range more
frequently. The use of low range is highly
recommended for cooler CVT operating temperatures
and longer component life.
Insufficient warm‐up of UTVs exposed
to low ambient temperatures.
Warm the engine before driving, the belt will become
more flexible and prevent belt burning.
Slow and easy clutch engagement.
Use the throttle quickly and effectively for efficient
engagement.
Towing/pushing at low RPM/low
ground speed.
Use low range only.
Utility use/plowing snow, dirt, etc.
Use low range only.
-154-
To Next Page
Loading...