FEATURES AND CONTROLS
FRONT AND REAR SHOCK ABSORBER ADJUSTMENT
The spring preload can be adjusted to suit the operating conditions. You can reduce preload for a
softer ride, or increase preload if frequent bottoming occurs or when carrying loads.
Always adjust the shock absorbers on the left and right sides to the same setting.
Uneven adjustment can cause poor handling and loss of stability, which could lead to an accident.
NOTICE
Frequent or severe bottoming can cause increased wear or damage to the vehicle.
Adjust the spring preload as follows:
To increase the spring preload, turn the adjusting ring in
direction (a).
To decrease the spring preload, turn the adjusting ring in
direction (b).
-53-
To Next Page
Loading...