EasyManua.ls Logo

CFMoto 600 - Page 63

Default Icon
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRERIDE INSPECTIONS
COOLANT
Check the coolant level in the coolant reservoir when the engine is cold (the level may change with
the engine temperature. The coolant level is satisfactory if it is between the minimum and maximum
level marks on the coolant reservoir. If the coolant is at or below the minimum level add coolant until
the coolant is at the maximum level. If coolant is not available used distilled water. Change the
coolant every two years. Refer to the maintenance schedule (page 106).
NOTICE
Hard water or salt water is harmful to the engine; use only an automotive grade coolant.
Coolant reservoir capacity (with the level at the maximum mark) 0.30 L (0.32 qt)
FINAL GEAR OIL
Make sure the final gear oil is at the specified level. Add oil if necessary (see page 106)
Recommended oil: SAE 15W40 or SAE 80W/90 GL4.
TIP: GL4 is a quality and additive rating (GL5 or GL6 is rated for hypoid gear oils and may also
be used).
DIFFERENTIAL GEAR OIL
Make sure the differential gear oil is at the specified level. Add oil as necessary (See page 106)
for details).
Recommended oil: SAE15W40 or SAE80W/90 GL-4
-62-

Related product manuals