GUIDE FOR SAFE USE
PARKING ON A FLAT AREA
When parking on a flat area, stop the engine and shift the drive select lever into the
neutral position. Apply the parking brake to help prevent the vehicle from rolling.
PARKING ON A SLOPE
The parking brake acts only on the rear wheels when in 2WD. For the parking brake to take
effect on all four wheels, shift to 4WD Diff. Lock before stopping the engine.
If you park on a hill that is too steep the vehicle may roll out of control. Never park on hills
that are so steep you cannot walk up them easily. If you must park on an incline follow
these instructions:
1. Bring the vehicle to a stop by applying the brakes.
2. Put the vehicle in 4WD Diff. Lock.
3. Turn the engine off.
4. With the brake pedal applied, set the parking brake.
5. Block the front and rear wheels with rocks or other objects.
Loading the total weight of operator, passenger, accessories, cargo, trailer tongue weight,
and the vehicle itself must not exceed 550 kg (1,215 lb). Vehicle loading can affect handling.
(See “loading” on page 76) .
-95-
To Next Page
Loading...