NOTE
3.1 When in reverse,the reverse indicator light should be on.
3.2 The i
ndicator light should be on in accordance with actual gear position ,if the light does not come
on,ask your dealer to inspect.
3.3 Due to the synchronizing mechanism in the engine ,the light may not come on until ATV starts
moving.
4. Check behind for people or obstacles,then release the rear brake pedal.
5. Open the throttle lever gradually and continue to watch rear while moving backward.
WARNING
When you shift into reverse ,make sure there are no obstacles or peois safeple behind you.When it
is safe to proceed,go slowly.
Shifting：Reverse to Park
1. Return the throttle lever to the closed position and stop the ATV completely.
2. Apply the rear brake pedal.
3.Shift from reverse to park by moving the gear selection along the shift guide.
-74-
Operation
To Next Page
Loading...