T
his procedure should be practiced at slow speed many times in a large area with no obstacles. If an incorrect
technique is used, your ATV may continue to go straight. If the ATV doesn't turn, come to a stop and then
practice the procedure again. If the riding surface is slippery or loose, it may help to position more of your weight
over the front wheels by moving forward on the seat. Once you have learned this technique you should be
able to perform it at higher speeds or in tighter curves. Improper riding procedures such as abrupt throttle changes,
excessive braking, incorrect body movements, or too
much speed for the sharpness of the turn may cause
t
he ATV to tip. If the ATV begins to tip over to the outside
while negotiating
a t
urn, lean more to the inside. It may
also be necessary to
gradually let off on the throttle
and steer to the outside of the
turn to avoid tipping
Remember: Avoid higher speeds until you are thoroughly
familiar with the operation of your ATV.
-90-
Operation
over.
To Next Page
Loading...