19
Pre-ride InspectionPre-ride Inspection
-
low the maintenance schedule described in this Owner’s Manual.
WARNINGWARNING
Perform a pre-ride inspection before each ride to detect any potential problem that could
occur during operation. The pre-ride inspection can help you monitor component wear
and deterioration before they become a problem.
Pre-Ride Inspection Check ListPre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)What to Do Before Starting the Engine (Key OFF)
ITEMITEM INSPECTION TO PERFORMINSPECTION TO PERFORM REMARKSREMARKS
Tires
Check tire pressure and condition.
Rear: 84 kPa (12 PSI)
Front: 70 kPa (10 PSI)
Rear: 100 kPa (14 PSI)
Optional
AT25×10-12
AT26×11-14
AT26×11-12
Wheels Check wheels and wheel nuts for damage.
Radiator Check cleanliness of the radiator.
Engine oil Check engine oil level.
Coolant Check coolant level.
Drive shaft boots Check drive shaft and drive shaft boots conditions.
To Next Page