67
Cold starting:
1. Press down the brake pedal.
2. Turn the ignition switch to “
“.
3. Shift transmission to Neutral.
NOTE
– When transmission is in Neutral, if the
Neutral indicator light in dashboard is off,
have your dealer inspect the wiring or ad-
just the gear shift linkage.
– The engine can be started in any gear
when brake pedal is pressed down. Any-
way, it’s recommended to start the engine
in Neutral or Park.
4. Ensure throttle pedal is released.
5. Turn the ignition switch to “
“ to start the
engine.
CAUTION
– If engine does not start after a few sec-
onds, do not keep the ignition switch in “
“ more than 10 seconds.
– If the battery is discharged, remove and
charge the battery.
6. Before you go, warm up the engine until it
idles smoothly.
CAUTION
Refer to the information in Break-In period
when starting the engine for the first time.
Shifting the Transmission
Apply brakes and select the desired shift lever
position.
Release brakes
CAUTION
When changing gearbox position, always
completely stop the vehicle and apply the
brakes prior to moving the shift lever. Dam-
age to the transmission may occur.
To Next Page
Loading...