90
Wheels and Tires
Wheel Removal
1. Place the vehicle on a level surface.
2. Elevate the vehicle and place a suitable
stand under the frame.
3. Remove the wheel nuts #1.
4. Remove the wheel.
Wheel Installation
Install the wheel and wheel nuts.
NOTE
Torque the wheel nuts to specification.
NOTE
Wheel nut tightening torque: 55 N·m front,
55 N·m rear.
Suspension
Front and Rear Suspension Lubrication
Periodically clean and lubricate the grease fit-
tings.
Brakes
Replacement of brake components requires
professional knowledge. Brake service should
be performed by your dealer.
Checking the front and rear brake pads If the
brake pad lining is worn to 1.5 mm, have your
dealer replace the brake pads.
Checking the brake uid level
Before riding, check that the brake fluid is
above the minimum level mark. Replenish the
brake fluid if necessary. Observe these pre-
cautions:
1
1
1. Grease fittings
To Next Page
Loading...