CH Hanson NORSE 9683412 User Manual

9643342.01 0518
Model 9683412
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and/or property damage!
Retain instructions for future reference.
10˝
Table Saw
Operating Instructions & Parts Manual

CH Hanson NORSE 9683412 Specifications

General

Brand	CH Hanson
Model	NORSE 9683412
Category	Saw
Language	English

Summary

SAFETY GUIDELINES

Specific Safety Rules

Detailed safety rules for operation and preventing accidents.

ELECTRICAL

Power Source

Grounding Instructions

Essential steps for safe electrical grounding to prevent shock.

Extension Cords

FEATURES

ASSEMBLY AND ADJUSTMENTS

Mounting the Table Saw Base on the Leg Stand

To Change Riving Knife Positions

To Check and Align the Riving Knife and Saw Blade

Guide for ensuring proper alignment of critical cutting components.

OPERATIONS

General Operation Warnings

Crucial safety warnings to be observed during saw operation.

Avoiding Kickback

Detailed methods and practices to prevent dangerous kickback incidents.

To Change Blade Depth

To Use the Rip Fence

To Use the Miter Gauge

Heeling (Paralleling) the Blade to the Miter Gauge Groove

Procedure for aligning the saw blade parallel to the miter gauge slot.

BLADE ADJUSTMENTS

To Replace the Blade

To Set the Blade at 0° and 45°

To Check the Alignment of the Rip Fence to the Blade

MAINTENANCE

Troubleshooting

Solutions for common problems encountered with the table saw.

Maintenance and Service