4
2. Igniting and Turning off the Sizzler Hybrid Gas Braai
WARNING: If at anytime during the igniting process, or during use, you smell
gas, immediately turn off the gas supply to the appliance at both the Burner
Control Knobs and the shut off valve on the Gas Bottle.
If you suspect that there is a gas leak, DO NOT use the appliance until it has
been checked and/or serviced by a qualified gas service technician
1. Open all gas shut-off valves, supplying your Sizzler Hybrid braai.
2. Remove Top-Grids and insert Charcoal and/or Wood (Ø80mm logs Maximum)
3. Push and turn far LH control knob counter-clockwise to “ON” position
4. Push Ignitor button, to ignite Burner 1.
5. If not alight after 4/5 strikes, turn gas off and wait for 30sec.
6. Turn on knobs 2, 3/4/5/6 on High in sequence.
7. After use, turn off all control knobs and valve on gas bottle, including shut-off
It may be necessary to push the ignitor button several times especially after chang-
ing a cylinder.
Should your braai not light after repeated attempts, have the unit examined by a
qualified gas technician.
Turning off the Sizzler Gas Braai
To turn off the appliance, turn all the Control knobs in a clockwise direction to the
OFF position. Then close the master shut-off at the gas bottle. This will shut off all
gas supply to the appliance.
LH control
Knob
Ignitor
Gas inlet
To Next Page
Loading...