Notices
Don’t connect the CF-UPS018 to equipment with the load that is over 500W or
overload will occur. When there is an overload, it will shutdown. You need to reduce your
total equipment load and try again.
In rare cases, when the UPS encounters an external short circuit or unusual power
usage, the external fuse will be burned. when this happen, you can just replace the fuse.
Fuse is 8A
2.2 Used as a high capacity portable power source
In your outdoor activities, you may need an AC/DC power source long time standby.
Now, you can easily provide the AC power, DC power anytime and everywhere for your all
kinds of device.
2.2.1How to provide power for AC appliances
Connect the power cable plug of the electrical to the AC outlet of the product, turn on
AC ON/OFF switch on the power button and the unit will start providing power to your
appliances
To Next Page
Loading...