22
Operation of appliances
LCD
?
reference 1:
Main ON / OFF button for controlling
uses and safety relays, the flashing of
the LED indicates that the battery is flat
and that the low-voltage control device
is about to be activated.
NB: when on, the panel carries out a
function test on all the LEDs except for
ref. 14 and 15.
reference 2:
Light control button
reference 3:
Water pump control button; it controls
the pump relay.
reference 4:
Exterior light control button; it switches
off automatically when the engine
starts up.
reference 5:
Button to control the auxiliary battery
B2.
reference 6:
Button to control the engine battery B1.
reference 7:
Button to control the clean water tank
and for the clean water tank filling
function.
reference 8:
Button with integrated twilight sensor
to control the intensity of the LED
back-lighting at night; see too the
«TWILIGHT» function.
reference 9:
This symbol flashes to indicate that the
engine battery B1 is flat.
reference 11:
This symbol flashes to indicate that the
clean water tank is empty.
reference 12:
This symbol flashes to indicate that the
dirty water tank is full.
reference 13:
LED display:
- Voltmeter to show the voltage of the
engine and auxiliary batteries (scale
from 0 to 100%)
- Level of clean water tank (reserve, 1/3,
2/3, 3/3).
reference 14:
Visual signal of connected 230V system.
reference 15:
Indicates the charging of the auxiliary
batteries by the engine alternator.
Modele PC180
To Next Page
Loading...
Need help?
General
