SAFETY
A-20 521969D1 K Rev
FIG. 24: Warning Hazard - Three Point Hitch Control (2).
The safety sign is located on each rear fender of machine.
Do not stand on or between implement and machine
while any hitch controls are being operated. Stand away
from implement and machine when any hitch control are
being operated. Standing on or between implement and
machine while hitch controls are operated may result in
personal injury or death.
FIG. 25: Danger - Rear Rollover (3). Safety sign is
located on back of machine.
Pull only from drawbar. Pulling from any other point may
cause a rollover.
FIG. 26: In case of emergency, use rear window as an
alternate means of exit (4). Both strut supports must be
disconnected from window before using as an exit.
FIG. 24
FIG. 25
FIG. 26