521969D1 K Rev B-3
GENERAL INFORMATION
MACHINE IDENTIFICATION
Machine Identification Information
Plate Locations
The product identification number (PIN) will be used to
identify a powered tractor designed for an operator to ride.
Components such as engines, transmissions and major
attachments that are not designed for an operator to ride
are identified by serial numbers.
For quick reference, record the identification numbers in
the spaces that are provided below Illustration.
FIG. 1: Machine pin. The plate is located on right side of
frame rail
Machine PIN: _________________________________
FIG. 2: Engine Serial Number. The plate is located on
left side of engine.
Engine Serial Number: _________________________
FIG. 3: Transmission Serial Number. The plate is located
on left front side of transmission above hardbar.
Transmission Serial Number: _____________________
FIG. 1
FIG. 2
FIG. 3
To Next Page
Loading...
Need help?
General
