Contents [ hide
1 WARNING
2 Programming
3 Installation
4 Maintenance
5 File Downloads
6 References
7 Related Manuals
WARNING
To reduce the risk of SEVERE INJURY or DEATH:
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of
electric shock.
This plug will fit in a polarized outlet ONLY one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
DO NOT alter the plug.
Light is intended for indoor ceiling or wall mount applications ONLY.
WARNING: This product can expose you to chemicals including lead, which are known to the State of
California to cause cancer or birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Programming
PROGRAM A DOOR OPENER/OPERATOR TO THE MyQ REMOTE LED LIGHT
1. Press the LEARN button on the light until the green LED comes ON.
2. Press the LEARN button on the door opener/operator. OR
Press the LEARN button on the door control* twice. OR
On the Smart Control Panel® 880LM or 880LMW, go to Menu > Program > MyQ Device.
3. The code has been programmed when the remote light blinks once.
* If using the light with an 8500/8500C opener and 888LM door control, contact technical support at
support.LiftMaster.com.
PROGRAM A SECURITY+ 2.0® REMOTE CONTROL TO THE MyQ REMOTE LED LIGHT
1. Press the LEARN button on the light until the green LED comes ON.
2. Press the button on the remote control that you wish to operate the light.
3. The code has been programmed when the remote light blinks once.
To program the light with other accessories, refer to the manual for your accessory.
ADD THE MyQ REMOTE LED LIGHT TO MyQ ACCOUNT
1. Press the LEARN button on the light until the green LED comes ON.
2. Login to the MyQ app and add the MyQ Remote LED Light.
TO ERASE ALL PROGRAMMING FROM THE MyQ REMOTE LED LIGHT
1. Press and hold the LEARN button until the green LED turns off (6-10 seconds). All programming is now erased.
Installation
The My0 Remote LED Light is designed to plug directly into a standard 120V outlet. Select an appropriate location
on the ceiling or wall to mount the light within 6 feet (1.83 m) of an electrical outlet so that the cord and light are away
from moving parts.
To Next Page
Loading...
