Owners
Operating Instructions
Manual
for
Wet/Dry Hot Stick Testers
C403-3178 (115 Volts)
&
C403-3179 (230 Volts)
P403-3194
© 2002 Hubbell / Chance • 210 N. Allen St., Centralia, MO 65240 U.S.A. Printed in USA
®
®
These instructions do not claim to cover all details or
variations in equipment, nor to provide for all possible
conditions to be met concerning installation, operation,
or maintenance of this equipment. If further information
is desired or if particular problems are encountered
which are not sufficiently covered in this guide, contact
A. B. Chance Company.
Introduction:
The Chance Hot Stick Tester is a portable, self-contained unit for checking the insulating integrity of electrical live-line
tools in accordance with industry standards. By design, it is for testing tools made only of fiberglass-reinforced plastic
(FRP) up to 3 inches in diameter. It is designed to detect leakage current through a tool.
To Next Page
Need help?
General
