Charge Amps Halo Wallbox User Manual (English)

To Next Page

HALO Wallbox™

INSTALLATION GUIDE

This guide is for TN and IT net.

The installation must be performed by an authorised electrician.

The installation must be protected by a type A RCD (DC protection is integrated in the HALO).

1. Mount the wifi antenna under-

neath the HALO as the picture.

3. Mount the HALO and ensure

mounting is sealed closely to the

wall to prevent water leaking into

the housing.

2. Drill holes for the HALO using

the drill template included and a

spirit tool, plug the holes. Make

sure you are mounting the HALO

on a flat surface.

Other manuals for Charge Amps Halo Wallbox

Need help?

Do you have a question about the Charge Amps Halo Wallbox and is the answer not in the manual?

General