Chargerlab Power Z User Manual

Manual
V1.0
2017.5

Chargerlab Power Z Specifications

General

Data Logging	Yes
Communication Interface	USB
D+/D- Voltage	0-3.3V
Supported Protocols	QC, AFC, FCP, PD
Voltage Resolution	0.1mV
Current Resolution	0.1mA

Summary

General Technical Specifications

Functional Technical Specifications

Function Features

High Accuracy Measurement

Details internal typical 0.02% accuracy measurement error and 10ppm temperature drift ADC chip.

Fast Measurement

Guaranteed accuracy with fast speed sampling, 10mS gathering of voltage and current data.

Off-line Curve Storage

Upper System Application

Powerful PC software for data management, calibration, firmware update, and PD2.0 protocol testing.

QC Protocol Test

PD Protocol Test

Internal chip for capturing and monitoring PD2.0 protocol data via PC software.

Gauge Measurement Screen

Run Rules Screens

Auto Run and Auto Stop Configuration

Main Screen 2: Line Resistance Evaluation

Line Resistance Measurement

Evaluate charge cable line resistance and line compensation ability of power adapters.

Main Screen 3: Micro Oscilloscope VBUS Curve

Main Screen 4: Micro Oscilloscope D+/D- Curve

QC/PD Protocol Sniffing

Monitor and sniff QC2.0/3.0 protocols and charge information.

Main Screen 4: QC2.0/3.0 Quick Charge Protocol Test

Protocol Test Execution

Initiate QC2.0/3.0 protocol testing for power adapters.

Main Screen 5: PD Communication Monitor

PD Monitor Mode

Monitor data packets on CC wires for PD communication.

PD Sniffer Mode

Sniff PD communication, send handshake, and change SRC Fixed Supply PDO.

PD Communication Details

System Setting 3: Calibration Parameters

Voltage and Gain Calibration