Stand Assembly/
PARTS FOR 2 STANDS:
Screw for fixing the upper and the lower base (4 pcs)
Upper base (2 pcs)
Base Bottom (2 pcs)
Stem (2 pcs)
Rubber (8 pcs)
INSTRUCTIONS:
Place the lower base on the bottom of the stem and align the holes
for the screws. Use two screws to join the two pieces being careful
not to over thighten.
Place the upper base on the top of the stem and align the holes for
the screws. Use two screws to join the two pieces being careful
not to over thighten.
Attach the rubbers provided at the bottom of the lower base.
Place the speaker into the appropriate calls on the base top.
To Next Page
Loading...