The best connection is obtained by using short lengths of board
cables. The cables should always be the bipolar-multithread type (in
no case should rigid single thread cable be used), preferably board,
such as the cables for hi-fi connections normally available in the
specialized shops. For those who wish to use ordinary electric wire, it
is advisable to keep to the following minimum requisites:
Connection Cable/
Distance
Amplifier/Speaker
Up to 5 meters
From 5 to 10 meters
Over 10 meters
Minimum Cable
Cross Section
0,75 sq. mm
1.00 sq. mm
2.00 sq. mm
To Next Page
Loading...