MOTORHOME HIRER’S GUIDE
CHAUSSON 2 BERTH
6
Check all switches are in the off position. Ensure you connect the hook-up cable to the
motorhome FIRST before plugging in to the 240 volt supply.
When disconnecting , unplug the hook-up cable from the 240 volt supply first and then
from the motor home. Return the hook-up cable to the rear storage compartment.
We also supply a 3pin domestic adaptor and a if going abroad a European adaptor.
You can keep an eye on the battery levels on the control panel by the entrance door.
To Next Page
Loading...
