11
SELF-CLEANING FEATURE
The InstaCoffee is equipped with a self-cleaning feature to prevent mineral
buildup.
TO USE:
1. Fill water tank with 14 oz of water or a combination of 13 oz of water and
1 oz of white vinegar.
2. Place a mug or travel cup large enough to hold at least 14 oz of water onto
the rubber trivet located on the base of the InstaCoffee.
3. If necessary, plug in the InstaCoffee.
4. Press and hold the brew button until it illuminates in red and starts flashing.
The InstaCoffee will start dispensing some hot water. When it stops, the light
will continue flashing for approximately 20 more minutes until it dispenses
the remaining water.
5. Do not remove coffee mug from base until the brew indicator lights stops
flashing and turns off completely.
6. After the light has turned off completely, carefully remove filled mug from
base. Discard brewed water mixture.
CAUTION: Mug and water mixture will be very hot!
CLEANING AND MAINTENANCE
To Next Page
Loading...
Need help?
General