9
BEFORE FIRST USE
For best results, follow these steps before using your blender for the
first time.
1. Remove all packaging materials, and check to ensure that all parts
and accessories are accounted for.
2. Wipe down the base with a damp cloth to remove any packaging
debris. Do NOT immerse the base in water.
3. Wash the blender jar, blade assembly, and two-piece lid in warm,
soapy water. Rinse and dry well. WARNING: The mixing blades are
sharp. Handle with care both when using and cleaning the product.
HOW TO ASSEMBLE THE BLENDER
The blender is extremely easy to assemble and disassemble.
1. Position the motor base on a dry, level surface such as a countertop
or table. Be sure the power cord is unplugged.
2. Turn the glass jar upside down and place the blade assembly on it
with the blades inside the jar. Make sure the rubber gasket is secure.
3. Twist the locking ring counter-clockwise to secure the blade assembly
in the locked position.
4. Turn the blender jar right side up, and place on the motor base so
that the handle is pointing towards the back of the base. Twist the jar
clockwise to lock into place. WARNING: Do not place the blender jar
on the base while the motor is running.
OPERATING INSTRUCTIONS
To Next Page
Loading...