If
the
4LO
switch
is
pressed when your vehicle is
in
gear and/or moving, the
amber
4LO
indicator light will flash for
30
seconds and not complete the
shift unless your vehicle is below
3
mph
(4.8
km/h)
and the transmission is
in
NEUTRAL (N)
or the clutch pedal depressed.
On automatic transmission equipped vehicles:
If
your transfer case does not
shift into
4L0,
your transmission indicator switch may require adjustment.
With your transmission in
NEUTRAL
(N),
press and release the
4LO
switch. While the amber
4LO
indicator light is flashing, shift your
transmission into
PARK (P).
Wait until the
4LO
indicator light goes solid amber before shifting your
transmission into gear. This will get you into
4L0,
but you should take your
vehicle in for service
so
normal operation can be restored.
To
shift
from
4LO
to
4HI
-
Your vehicle must be stopped or moving less
than
3
mph
(4.8
km/h)
with the transmission in
NEUTRAL (N)
or the clutch
pedal depressed. The preferred method for shifting out of
4LO
is to have
your vehicle slowly moving
1
to 2 mph
(
1.6
to
3.2
km/h).
Press and release
the
4HI
switch. You must wait for the
4HI
indicator light to stop flashing
and go solid amber before shifting your transmission into gear or releasing
the clutch pedal.
If the
4HI
switch is pressed when your vehicle is in gear and/or moving,
the
4HI
indicator light will flash for
30
seconds but not complete the shift
unless the vehicle is below
3
mph
(4.8
kmh)
and the transmission is in
NEUTRAL
(N)
or the clutch pedal depressed.
On automatic transmission equipped vehicles:
If
your transfer case does not
shift into
4H1,
your transmission indicator switch may require adjustment.
With your transmission
in
NEUTRAL
(N),
press and release the
4HI
switch.
While the
4HI
indicator light is flashing, shift your transmission into PARK
(P).
Wait until the
4HI
indicator light goes solid amber before shifting your
transmission into gear. This will get you into
4H1,
but you should take your
vehicle in for service
so
normal operation can be restored.
2-31