Press RESET to acknowledge a DIC message(s).
Pressing RESET will also turn
off
a DIC message but
the
LOW
FUEL message will come on again in
10
minutes
if
you have not added fuel to the vehicle.
Here are five things that some owners ask about.
All
these things are normal and do not indicate that
anything is wrong with the fuel gage.
e
At the gas station, the gas pump shuts
off
before
the gage reads
F
(full).
It
takes more (or
less)
fuel to
fill
up than the gage
reads. For example, the gage reads half full, but
it
took more (or less) than half of the tank’s
capacity to fit it.
The gage pointer may move while cornering,
braking or speeding
up.
The gage may not indicate
E
(empty) when the
ignition is turned
off.
The gage reading may change slightly within the
first
several
minutes
after starting the vehicle.
You can use the Driver Information Center
(DIC)
to
display more detailed fuel information. Each time you
press FUEL, one of the following will appear in the
Driver Information Center (DIC).
e
AVERAGE:
The fuel economy calculated for the
current tank of fuel, or since you last reset the
display.
0
INST
(Instant):
The fuel economy calculated for
0
RANGE:
The distance you can drive before
your current driving conditions.
refueling.
You should reset the fuel information display every time
you refuel.
To
reset the display, press FUEL until
AVERAGE appears. Then, press RESET on the Driver
Information Center
(DIC).
3-43
To Next Page
Loading...
Need help?
General
