Lap-Shoulder
Belt
Here’s how
to
wear a lap-shoulder belt properly.
If this happens, just let the belt go back
all
the way
and start again.
If the belt is not long enough, see Safety Belt
Extender on page
1-33.
Make sure the release button on the buckle
is
positioned so you would be able to unbuckle the
safety belt quickly
if
you ever had
to.
1.
Pick up the latch plate and
pull
the belt across you.
2.
Push the latch plate into the buckle until it clicks.
Don’t let it get twisted.
Pull up on the latch plate
to
make sure it
is
secure.
When the shoulder belt is pulled out all the way
you will engage the child restraint locking feature.
3.
To
make the lap part tight, pull down on the buckle
end of the belt as you pull up on the shoulder part.
1-28
To Next Page