Battery Replacement
Under normal use, the battery in your remote keyless
entry transmitter should last about four years.
You can tell the battery
is
weak
if
the transmitter won’t
work at the normal range in any location.
If
you have
to
get close to your vehicle before the transmitter works,
it’s probably time to change the battery.
Notice:
When replacing the battery, use care not to
touch any of the circuitry. Static from your body
transferred to these surfaces may damage the
transmitter.
TO
replace the battery in the keyless entry transmitter,
do the following:
1.
Use an object like a coin
to
pry open the transmitter.
2.
Once the transmitter is separated, use an object
like a pencil
to
remove the old battery. Do not use
a metal object.
3.
Remove and replace the battery, positive
(+)
side down.
4.
Snap the transmitter back together tightly to be sure
no moisture can enter.
5.
Press and hold LOCK and UNLOCK on the remote
keyless entry transmitter for seven seconds to
resynchronize the transmitter.
6.
Check the operation of the transmitter.
2-6
To Next Page