Chevrolet 2006 Monte Carlo - Multiple-Disc CD Player

13
equipped, press the MENU button
until the clock option is displayed,
and then press the pushbutton locat-
ed under the clock option label. The
HR, MIN, MM, DD, YYYY labels will
appear on the display.
2. Press the pushbutton under any of
the labels to be changed.
3. Press the pushbutton again or the
FWD button to increase the numbers.
Press the REV button to decrease
the numbers. Rotating the Tune knob
also will increase or decrease the
selected label.
4. Press the Clock or MENU button
again to set the currently displayed
time and date.
MP3 Capability (if equipped)
If your AM/FM stereo with CD has MP3
playing capability, a CD-R or CD-RW
containing MP3, audio tracks will play
automatically when inserted into the CD
player. An MP3 symbol will be displayed.
Portable Audio Player
A portable audio player can be connect-
ed to the auxiliary input jack located on
the radio. When connected, the radio
automatically begins playing audio from
the player over the vehicle speakers.
Radio Data System (if equipped)
When you tune to a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
provide the time of day, a program type
for current programming and the name
of the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
See Section 3 of your Owner Manual.
With the in-dash 6-disc CD player, note
that you cannot directly load a CD as in
single-play systems.
To Load a Single CD:
• Press and release the Load button.
Wait for the display prompt before
loading the CD.
To Load Multiple CDs:
• Press and hold the Load button for two
seconds. Follow the display prompts
to load each CD. Press the Load but-
ton again to cancel loading more CDs.
To Play a Specific CD:
• Press the pushbutton under the
up/down arrow label on the display to
select a loaded CD.
To Eject a CD:
• To eject the CD that is currently play-
ing, press the button once.
• To eject all CDs, press and hold the
button for two seconds.
Multiple-Disc CD Player
(if equipped)