The cruise control
buttons are located
on the steering
wheel. The cruise
control functions
include:
(On/Off): Press
this button to turn
the cruise control
system on and off.
– SET (Set): Press
this button to set a
speed, or to
decrease the set
speed if the system
is active. When the
cruise control speed is set, the cruise
light will illuminate in the instrument
cluster.
+ RES (Resume): Press this button to
resume a set speed, or to increase the
set speed if the system is active.
(Cancel): Press this button to cancel
the cruise control set speed.
See Section 3 of your Owner Manual.
Getting to Know Your Monte Carlo
16
(Headlamps): Turns on the head-
lamps, parking lamps and taillamps.
(Fog Lamps) (if equipped): Push in
the exterior lamp control to turn on the
fog lamps.
See Section 3 of your Owner Manual.
Cruise Control
Automatic Lamp Control
Your vehicle is equipped with an
Automatic Lamp Control (ALC) system,
which automatically turns on the head-
lamps and other exterior lamps at night
or when necessary. The exterior lamps
also can be operated manually.
Light Sensor
The Automatic Lamp Control system’s
light sensor is located on top of the
instrument panel. To ensure proper system
operation, it’s important to avoid placing
any objects on or near the sensor.
Exterior Lamp Control Switch
The exterior lamp control switch is locat-
ed on the instrument panel to the left of
the steering wheel. The switch can be
rotated to each of the following positions:
(Off): When operating in the AUTO
position, a momentary turn of the lamp
control switch to the Off position will turn
off the ALC system and all of the exteri-
or lights.
AUTO (Automatic): Automatically turns
on Daytime Running Lamps (DRLs) in
the daytime and headlamps, parking
lamps and taillamps at night.
(Parking Lamps): Turns on parking
lamps and taillamps.
Exterior Lamps
To Next Page
Loading...
