pressure and tire pressure system pro-
gramming (if equipped), compass zone
and calibration (if equipped), and
Remote Keyless Entry programming.
Customization: Use this button to
customize certain vehicle features to
your preference.
Set/Reset: Use this button to set or
reset trip/fuel and vehicle information as
well as acknowledge DIC messages.
Vehicle Customization Settings
To customize features:
1. Press the (Customization) button
until FEATURE SETTINGS is
displayed.
2. Press the (Set/Reset) button to
enter the Feature Settings menu.
3. Press the button to display avail-
able customization features.
4. With the desired customization fea-
ture displayed, press the button
to access the feature settings.
5. Press the button to scroll through
the available settings.
6. With the desired setting displayed,
press the to select it.
7. Press the button or button
to exit the Feature Settings menu.
Customization features include:
• Display Language (DIC information
can be displayed in the following
languages)
– English (default)
– French
– Spanish
• Auto Door Unlock (Automatically
unlocks the vehicle doors)
–Off
– Driver at Key Out
– Driver in Park
5
– All at Key Out
– All in Park (default)
– No Change
• Remote Door Lock (Feedback from
RKE locking)
–Off
– Lights Only
– Horn Only
– Horn & Lights On (default)
– No Change
• Remote Door Unlock (Feedback
from RKE unlocking)
– Lights Off
– Lights On (default)
– No Change
• Exit Lighting (Amount of time the
exterior lamps remain on after exiting)
–Off
– 30 Seconds (default)
– 1 Minute
– 2 Minutes
– No Change
• Approach Lighting (Lights turn on
when RKE is pressed)
– On (default)
– Off
– No Change
• Chime Volume (Adjust the
volume level)
– Normal (default)
– Loud
– No Change
• Remote Start (Enable Remote
Vehicle Start)
– On (default)
–Off
– No Change
• Factory Settings (Sets all features
to the factory default)
– Restore All (default)
– Do Not Restore
To Next Page
Loading...
