Adding Coolant to the Intercooler System
Fill Neck
If coolant is not visible in the fill neck, add a 50/50
mixture of clean, drinkable water and DEX-COOL
®
coolant at the fill neck, but be sure that the
cooling system, including the fill neck pressure
cap, is cool before you do so.
{CAUTION:
Steam and scalding liquids from a hot
cooling system can blow out and burn
you badly. They are under pressure, and if
you turn the intercooler system pressure
cap — even a little — they can come out at
high speed. Never turn the cap when the
intercooler system, including the
intercooler system pressure cap, is hot.
Wait for the intercooler system and
intercooler system pressure cap to cool if
you ever have to turn the pressure cap.
{CAUTION:
Adding only plain water to your
intercooler system can be dangerous.
Plain water, or some other liquid such as
alcohol, can boil before the proper coolant
mixture will. With plain water or the wrong
mixture, your engine could get too hot.
Your engine could catch fire and you or
others could be burned. Use a 50/50
mixture of clean, drinkable water and
DEX-COOL
®
coolant.
Notice: In cold weather, water can freeze and
crack the engine, intercooler, and other
parts. Use the recommended coolant and the
proper coolant mixture.
301
To Next Page
Loading...
