To Next PageTo Next Page
Need help?Do you have a question about the Chevrolet Corvette 1979 and is the answer not in the manual?
General| Brand | Chevrolet |
|---|---|
| Model | Corvette 1979 |
| Category | Automobile |
| Language | English |
Explains how to use the manual to understand your vehicle and save money on upkeep.
Lists essential safety practices and precautions to follow while working on a vehicle.
Details how to decipher engine identification numbers and their significance.
Explains how to check and adjust drive belt tension for proper operation.
Outlines critical safety measures when working with air conditioning systems and refrigerants.
Explains how to check engine oil level, noting precautions against overfilling.
Details how to check the fluid level in manual transmissions and the correct lubricant type.
Guides on checking automatic transmission fluid levels, including specific cautions.
Instructions for checking the brake fluid level in the master cylinder and its maintenance.
Offers advice on selecting appropriate engine oils and fuels based on vehicle requirements.
Outlines specific procedures for tuning up the Corvette, intended for completeness.
Explains the function and components of a typical spark plug and the importance of the gap.
Details the process for adjusting valve lash on engines with hydraulic lifters.
Explains the battery's role and the function of the starting motor and solenoid.
Lists precautions for safe handling of electrical system components and avoiding damage.
Provides step-by-step instructions for removing and installing the starter motor.
Describes how to remove and inspect pistons and rings.
Details how to inspect and replace connecting rod bearings.
Provides instructions for removing and installing the oil pan and its components.
Details the steps for removing the oil pump assembly.
Explains how to overhaul the oil pump, including inspection of parts.
Explains the function and maintenance of the PCV system.
Describes the components and operation of the Air Injection Reactor system.
Describes the mechanically operated diaphragm-type fuel pump used in 1963-81 Corvettes.
Details the process for removing and installing the electric fuel pump used in 1982-84 models.
Covers the disassembly and assembly of the primary carburetor.
Guides on diagnosing electrical issues by systematically checking circuits and components for faults.
