Chevrolet Express 2025 - Operation

Chevrolet Express Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18528029) - 2025
Infotainment System 99
•
P
re
ss and hold to go backward fast
through atrack.
12.
P
•
Press to turn the infotainment
system on or off.
•
Turn to adjust the volume.
13.
¨ SEEK
•
Seeks or scans to the next station.
14.
© SEEK
•
Seeks or scans to the
previous station.
15.
H
•
Press to set the clock and date.
Operation
Using the Radio
O : Press to turn the system on and off.
Turn clockwise or counterclockwise to increase
or decrease the volume.
4 : Press to switch the display between the
radio station frequency and the time. While the
ignition is off, press this button to display the
time. Press to display additional text
information related to the current FM-RDS
sta
tion or MP3 song. Achoice of additional
information such as Channel, Song, Artist, and
CAT (category) can display. Continue pressing
to highlight the desired tab, or press the softkey
under any one of the tabs and the information
about that tab displays.
Speed Compensated Volume (SCV): SCV
automatically adjusts the radio volume to
compensate for road and wind noise as the
vehicle speed changes while driving, so that the
volume level stays consistent.
To activate SCV:
1. Set the radio volume to the desired level.
2. Press the MENU button to display the radio
setup menu.
3. Press the softkey under the AUTO
VOLUM (automatic volume) tab on the
infotainment display.
4. Press the softkey under the desired SCV
setting (OFF, Low, Med, or High) to select
the level of radio volume compensation.
The display times out after approximately
10 seconds. Each higher setting allows for
more radio volume compensation at faster
vehicle speeds.
Setting the Tone (Bass/Treble)
To
adjust the bass or treble:
1.
Press the f knob until Bass or Treble
displays.
2. To adjust the setting, do one of
the following:
•
Turn the f knob.
•
Press ¨ SEEK, or © SEEK.
EQ : Press this button to choose bass and treble
equalization settings designed for different
types of music. Selecting MANUAL, or changing
bass or treble, returns the EQ to the manual
bass and treble settings.
Unique EQ settings can be saved for
each source.
Adjusting the Speakers (Balance/Fade)
BAL/FADE : To adjust the balance or fade:
1.
Press the f knob until the speaker control
tabs display.
2. Highlight the desired speaker control tab by
doing one of the following:
•
Press the f knob.