Chevrolet SPARK 2020 - Connectivity and Audio Systems; Bluetooth System Pairing; Streaming Audio via Bluetooth; Audio Steering Wheel Controls

10
AUDIO STEERING WHEEL CONTROLS
F
BLUETOOTH® SYSTEM
Refer to your Owner’s Manual for important information about using the Bluetooth system while driving.
Before using a Bluetooth-enabled device inthe vehicle, it must be paired with the
in-vehicle Bluetooth system. The pairing process is disabled when the vehicle is moving. Not
all devices will support all functions. Visit my.chevrolet.com/learn for more information.
PAIR A PHONE
1. To use voice recognition, press the Push to Talk button; after the tone,
say“PairPhone.”
To use the infotainment screen, select
Phone > Phones or Connect Phone >
AddPhone.
2. Start the pairing process on the phone.
From your phone’s Bluetooth settings,
select the name shown on the infotain-
ment screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone
screen is displayed. Your phone book may be downloaded depending on the phone.
STREAM AUDIO
With a paired device connected via Bluetooth, select Audio, and then touch More to
select Bluetooth as the audio source. Control audio operation using the device controls
or infotainment controls.
See Infotainment System in your Owner’s Manual.
Volume
Press the + or – button to adjust the
volume.
SRC Source
Press to select an audio source.
Next/Previous Favorite Station
Rotate the thumbwheel up or down to
goto the next or previous favorite radio
station or track.
Push to Talk
Press to answer an incoming call, or to use voice recognition with the Bluetooth or
OnStar® system.
End Call/Mute
Press to end or decline a call. Press to mute/unmute the vehicle speakers.
See Instruments and Controls in your Owner’s Manual.
F Optional equipment