Infotainment system 129
devices may display AVRCP being
connected for the initial
connection.)
■ The information about playing track
and track position will not be
displayed on the Infotainment
system screen.
Cautions for playing Bluetooth audio
■ Do not change the track too quickly
when playing Bluetooth audio.
It takes some time to transmit data
from the mobile phone to the
Infotainment system.
■ If the mobile phone or Bluetooth
device is not in the waiting screen
mode, it may not automatically play
despite being carried out from the
Bluetooth audio play mode.
If Bluetooth audio playback is not
functioning, then check to see if the
mobile phone is in the waiting
screen mode.
■ Sometimes, sounds may be cut off
during the Bluetooth audio
playback. The Infotainment system
outputs the audio from the mobile
phone or Bluetooth device as it is
transmitted.
Bluetooth error messages and
measures
■ Bluetooth deactivated
Check if Bluetooth activation is
setup as ON. The Bluetooth
function can be used upon turning
on Bluetooth activation.
■ Bluetooth is busy
Check if there are any Bluetooth
devices connected. To connect
another device, disconnect any
other connected devices first, and
then reconnect.
■ Device list is full.
Check if there are less than 5
registered devices. No more than 5
devices can be registered.
■ No phone book available
This message will be displayed if
the mobile phone does not support
contacts transmission. If this
message appears after several
attempts, then the device does not
support contacts transmission.
Note
The message will be displayed when
the transmission of contacts is
supported while information with a
device error is also transmitted.
Update the device again if this
occurs.
■ Phone book is empty
This message is displayed if no
phone numbers are stored in the
mobile phone. This will also be
displayed if the phone log
transmission is supported, but in a
way that is not supported by the
Infotainment system.
To Next Page
Loading...
