154 Driving and operating
2: Allows the transmission to shift
from 1st to 2nd gear and prevents
automatic shifting into 3rd or
4th gear.
Select drive range 2 for more power
when climbing hills and for engine
braking when driving down steep
hills.
1: This position locks the transmission
in first gear.
Select 1 for maximum engine braking
when driving down severe grades.
Caution
Do not accelerate while engaging
a gear.
Never depress the accelerator
pedal and brake pedal at the same
time.
When a gear is engaged, the
vehicle slowly begins to creep
when the brake is released.
Do not use the P (Park) position in
place of the parking brake.
Turn off the engine, apply the
parking brake, and remove the
ignition key when leaving the
vehicle.
Never leave the vehicle
unattended while the engine is
running.
Shifting between gear positions
Movement between certain gear
positions requires pressing the
release button on the side of the
selector lever.
Follow the descriptions as indicated
by the arrows when shifting the
selector lever.
Push the release button to shift.
Arrows indicate shifts that do not
require you to push the release
button.
To Next Page
Loading...
