DIC Vehicle Personalization
Your vehicle has a personalization feature that allows you
to program certain features to a preferred setting for
up to two drivers. The number of programmable features
varies depending upon which model of the vehicle you
purchased. Once the features are programmed, the
saved settings are recalled by pressing the unlock button
on the remote keyless entry transmitter, 1 or 2, or by
pressing the appropriate memory button, 1 or 2, located
on the outboard side of the driver’s seat. See Memory
Seat on page 2-44 for more information.
The following is a list of available programmable options:
• AUTOMATIC LOCKING
• AUTOMATIC UNLOCKING
• REMOTE LOCK FEEDBACK
• REMOTE UNLOCK FEEDBACK
• HEADLAMPS ON AT EXIT
• PERIMETER LIGHTING
• SEAT POSITION RECALL (If equipped)
• DISPLAY LANGUAGE
• DISPLAY UNITS (U.S./MET)
y (Personalization): Press this button located on the
steering wheel to access the vehicle personalization
menu and customize the personalization settings
on your vehicle.
Automatic Locking
This feature allows you to choose how the vehicle’s
doors are locked. Press the personalization button
until AUTOMATIC LOCKING appears in the display.
To access the modes for AUTOMATIC LOCKING, press
the select button. Once AUTOMATIC LOCKING is
selected, press the select button to scroll through the
following modes:
Mode 1: LOCK DOORS OUT OF PARK
Mode 2: LOCK DOORS WITH SPEED
If you choose Mode 1, the doors will lock when the
vehicle is shifted out of PARK (P).
If you choose Mode 2, the doors will lock when the
vehicle speed is above 8 mph (13 km/h) for three
seconds.
Scroll through the list of modes. When the mode you
want is displayed on the DIC, press personalization
button to set your choice, return to the personalization
menu, and advance to the next programmable feature.
For more information on automatic door locks see
Programmable Automatic Door Locks on page 2-9.
3-52
To Next Page
Loading...
