Second Printing for Chevrolet Tracker Owner’s Manual – 1999
yellowblue
1-9
JE–11–0011–X
6. Hook the anchor plate
over the button on the
seat back.
To raise the rear seat:
1. Fold the rear seatback up and make sure it is locked
in position. Push and pull on the seatback to ensure
it’s locked in position.
2. Remove the head restraint and insert it into the
seatback. Make sure the head restraint is secure in
the seatback.
3. Insert the anchor plate into its storage slot on the
bottom of the seat cushion.
4. Fold the seat cushion back and make sure it is locked
into position.
5. Remove the seat belt buckles and center seat belt
from the seatback pocket.
Safety Belts: They’re for Everyone
This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.
And it explains the Supplemental Restraint System
(SRS), or air bag system.
CAUTION:
Don’t let anyone ride where he or she can’t wear
a safety belt properly. If you are in a crash and
you’re not wearing a safety belt, your injuries
can be much worse. You can hit things inside the
vehicle or be ejected from it. You can be seriously
injured or killed. In the same crash, you might
not be if you are buckled up. Always fasten your
safety belt, and check that your passengers’ belts
are fastened properly too.
To Next Page
Loading...
