2-59
Removing and Installing Your Rear Window
The rear window on your vehicle is removable. This allows
you to open the back opening all the way or to replace
the window if it becomes deteriorated. To remove the
rear window do the following:
1. Open the rear gate all the way.
2. Unfasten the canvas flaps at the lower corners of the
rear window to uncover the zipper pull.
3. Unzip the rear window.
4. Hang the rear window down so it hangs outside
of the vehicle.
5. Pull the rear window frame bar rearward
(see illustration above). Then slide the bar to
the left to remove the window.
Reverse the steps to install the rear window. Make sure
that all the Velcro
R
strips and flaps are correctly
fastened and overlapped. Make sure that the window is
completely closed before driving.
To Next Page
Loading...
