1-9
4. Store the head restraint
in the top of the folded
seat cushion.
5. Pull up on the seatback
release knob(s) on top of
the seatback and fold the
seatback down.
On two
-door models,
pull up on both release
knobs at the same time
to lower the seatback.
To raise the rear seat do the following:
1. Fold the rear seatback up. Push and pull on the
seatback to ensure it’s locked in position.
2. Reinstall the head restraint by inserting it into the
seatback. Make sure the head restraint is secure in
the seatback.
3. Fold the seat cushion back and make sure it is locked
into position.
4. Remove the safety belt buckles and center safety belt
(if equipped) from the seatback pocket.
To Next Page
Loading...
