Securing a Child Restraint in a
Center Rear Seat Position
4–Door Models
You’ll be using the lap belt.
The word “CENTER” is on both the buckle and latch
plate. Also, the center buckle and latch plate are
a different color than the two outboard buckles and
latch plates.
Be sure to follow the instructions that came with the
child restraint. Secure the child restraint when and
as the instructions say.
See
Top Strap on page 1-41
if the child has one.
1. Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
2. Put the restraint on the seat.
3. Run the vehicle’s safety belt through or around the
restraint. The child restraint instructions will show
you how.
1-49
To Next Page
Loading...
