EasyManua.ls Logo

CHI LAVA 2.0 - Temperature Selection and Locking

CHI LAVA 2.0
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21ENGLISH
Press the on/off switch on the appliance limb in order to
switch on the appliance.
The display will light up.
The selected temperature flashes briefly on the dis-
play.
The display then shows the current temperature and
heats up.
When the selected temperature has been reached, it
is lit continuously.
Automatic safety shut-off
If you do not press a button on the switched-on appliance
for approx. 60 minutes, it will switch itself off. This is a safe-
ty function.
Selecting the temperature
The appliance has a safety function to prevent accidental
adjustment of the temperature.
Approx. 5 seconds after the last touch of a button, the lock
symbol
appears on the display. When the symbol is lit,
the temperature cannot be changed.
1. Press the on/off switch briefly once. The lock symbol
disappears.
2. Touch the button + or - to adjust the temperature. You
change the temperature in intervals of 5 °C. The tem-
perature range extends from 80 to 220 °C.
The set temperature flashes for a few seconds. The cur-
rent temperature is then shown again. These alternate
until the set temperature has been reached.
Switching off
To switch off, hold down the on/off switch until the dis-
play goes off.
3.5 The right temperature
WARNING!
~ Hair can be damaged by excessive temperature, exces-
sively long contact or too frequent straightening. Par-
ticularly at higher temperatures, you should not treat
the same strand of hair more than once.
__CHI LAVA Flat IRON.book Seite 21 Freitag, 22. Mai 2020 11:15 11