42
on the lid, as the steam released can cause burns.
• After completing the sterilising cycle, the water con-
tained in the appliance and the upper surface ma
y
be very hot. Always take great care to prevent all
risks of burns!
• Warning: wait for at least a few minutes at the end
of each sterilising cycle before removing the lid. Al-
ways remove the lid carefully to prev
ent boiling hot
steam or drops of extremely hot water from exiting
the appliance and causing burns.
• Do not obstruct the steam outlet located on the up-
per part of the lid.
• Never use the bottle warmer without water in the
heating tank.
• To avoid possible burns, during and at the end of
the operating cycle, take care as: the water and the
upper surface of the appliance may be very hot. Al-
ways carefully remove the bottle and/or baby f
ood
jar at the end of the operating and/or maintenance
cycle as they may be hot.
• Before feeding the heated food to the child, always
make sure that the temperature is not too high (not
over 37°C).
• Never move the bottle warmer during use or when
it still contains hot liquids.
• To disconnect the bottle warmer from the mains,
switch off the product by pressing and holding the
on/off touch button, then disconnect the power ca-
ble plug from the socket. Never pull on the power
To Next Page
Loading...
