INSTRUCTIONS:
Fit360 LeverLock
Door Cover
IMPORTANT: Please also refer to
the instructions that came with
your product.
Push both hook and loop straps through
the slot at the bottom of the LeverLock Door.
3
Turn the Base around and nish pulling
both hook and loop straps up through the
slot at the bottom of the LeverLock Door.
4
1
SS0043E_03
KIT INCLUDES: Door Cover
Open the LeverLock Door by pushing in at
the top of the lever, and pulling the lever out.
1
Slide the Door Cover down onto the
LeverLock Door, as shown.
2
NOTE: Door Cover intended for use in Rear-Facing mode.
Need help?
General
To Next Page