60
FORWARD-FACING INSTALLATION
INSTALL USING LATCH
Locate LATCH Connector Storage compartments. Remove LATCH straps.
Make sure
SuperCinch
™
LATCH Tightener strap (Pull 2
nd
) and LATCH
Adjuster strap (Pull 1
st
) are loosened to their full length.
Grab both ends of LATCH straps. Slide LATCH strap to red
FORWARD-FACING opening on both sides. Note: Both LATCH Connector
Storage compartments must be open and both LATCH straps must be
loosened to their full length in order to slide LATCH straps into position.
Close both LATCH Connector Storage compartments.
2
1
3
Do not use the lower anchors of the child restraint
anchorage system (LATCH system) to attach this
Child Restraint when restraining a child weighing more than
40lbs (18 kg) with the internal harness of the child restraint.
When not accessing the LATCH or changing the
belt path ALWAYS keep LATCH Connector Storage
compartments closed.