4
3. Raise the seat by holding the upper part of
the backrest and pull it upward, until the desired
height is reached (diagram 3). The Highchair can
be adjusted to 7 height positions.
4. Lower the seat and leg rest with your hands
(diagram 4). The seat is fixed to the frame by a
fastening device.
5. Press the side adjustment buttons and lower
the leg rest in a vertical position (diagram 5).
6. Lower the armrests by pressing the two but-
tons located at the rear of the armrests (dia-
gram 6)
The armrests must always be maintained in a horizontal
position. The armrests can be maintained in a vertical
position only when closing the Highchair.
INSTRUCTIONS FOR USE
To Next Page
Loading...
