Part 4.
Installation
1. Installation and Operation Instructions
CAUTIONS
For correct installation read this manual before starting installation and save this manual in a safe place for
future reference.
Only trained and qualified service personnel should install repair or service air conditioning equipment. Users
should not install the air conditioner by themselves.
Nominal cooling capacity of outdoor unit is tested under the condition that outdoor ambient dry/wet bulb
temperature is 35°C/24°C.Actual max. Output capacity depends on outdoor ambient temperature and
connection method, which may differ from nominal value. According to refrigeration system design and
operation requirement, this outdoor unit should work with indoor units with corresponding total capacity, which
ensures optimal performance and safe operation. To meet users' demand, this unit is specially designed that
unit can work even though required total capacity of indoor units exceeds nominal value. Under this condition,
actual output capacity of single indoor unit may be attenuated and less than nominal value. We disclaim all
responsibility for malfunction caused by users’ noncompliance of this installation and operation instructions.
Please read the instructions carefully and follow the requirements below:
1.1 Type of Indoor Unit
DC inverter multi system connect different style indoor units, includes 84series、 87series、107series. All type
indoor units can be freely combined.
To Next Page
Loading...
Need help?
General
