OPERATING MACHINE IN SELECTED MODES
1. Point the remote controller at the unit ,press the ON/OFF button,then press the MODE button,select the
needed mode:ATUO,COOL,DRY,HEAT,or FAN.
2. Press the SET TEMPERATURE button to increase the decrease the reading until the needed temperature
is displayed .The room set temperature range is from 16℃-32℃(61℉-90℉).
(It would be automatically set at 25℃(76℉) and unadjustable in AUTO and DRY mode.)
3. Press the FAN SPEED button to choose the air rate you want :LOW (display indicates “ “).Med(display
indicates:” ”),Hi(display indicates” ” ,Auto(display” ” indicator flashing).
(It would be automatically set at low speed and unadjustable in DRY mode.)
4. Press the SWING button to choose the up/down air flow direction you want :natural flow(display indicates”
” ,swing(display” ” indicator flashing ,fixed wind(display indicates” ” )
(It would be automatically set at fixed wind air flow direction in DRY mode.)
TURBO OPERATION
Press TURBO button during COOL or HEAT operation ,the air rate can be setted in HIGH.Press the TURBO
button again can release the TURBO operation.
Note:during TURBO operation, the air rate cann’tbe changed.
ADJUSTING LEFT/RIGHT AIR FLOW
Methods 1:Manually adjust
Adjust the direction by moving directly the left/right air flow direction adjusting fin by hand.
Caution:when adjust the direction,stop air conditioner.
Methods 2: Horizontal & vertical auto swing (three-dimensional air flow model)
Adjust the direction by remote controller.Press the AIR FLOW button,the air swing fins will constantly make the
left/right swing or fixed direction in air delivery.
TIMER OPERATION
Set turning off time
Set the time for the unit to turn off and when it is time,the air conditioner will automatically stop operating.
1. During the operation of the air conditioner ,press the TIMER button and the air conditioner will enter the
timed switch-off mode.
2. Continuely press the TIMER button to set the needed time for switching off the machine.The timer can
make the setting in the range from 1-24hours.Every the button is pressed,indication change is the following
sequence:1→2→……→24→cancel (no indication) →1.
3. After the setting of the timed switch-off,the digits shown on the display screen will go down by 1 for every
elapsed hour.The display digits indicate the remaining time prior to the timed switch-off.
Set turning on time
Set the time for the unit to turn on and when it is time, the air conditioner will automatically start operating.
1. When the air conditioner is in the standby mode ,press the TIMER button and the air conditioner will enter
the timed switch-on mode.
2. Continuely press the TIMER button to set the needed time for switching on the machine.The timer can
make the setting in the range from 1-24hours.Every the button is pressed,indication change is the following
sequence:1→2→……→24→cancel (no indication) →1.
3. After the setting of the timed switch-on,the digits shown on the display screen will go down by 1 for every
elapsed hour.The display digits indicate the remaining time prior to the timed switch-on.
To Next Page
Loading...
Need help?
General
