CHILDCRAFT FOREVER Eclectic F09009

To Next Page

This page is for printing and document

formating specications only.

THIS PAGE DOES NOT PRINT.

DO NOT scale the artwork for printing. Each page

has been scaled for proper scaling of parts.

Page 1 will be the cover page and rst page printed

after this specication page. Any blank pages needed will

be placed at the end of this booklet.

printer to arrange booklet pages in proper

sequence according to page number.

297 mm

210 mm

Revisions

A initial release.

B. Changed felt pad part GG to KK. RMK

C. Revised warning block per Lab LMH

D. Removed pilot holes from dressing kit LMH

Need help?

Do you have a question about the CHILDCRAFT FOREVER Eclectic F09009 and is the answer not in the manual?

Summary

Parts List and Preparation

Parts List

Catalog of all components and hardware required for assembly.

Preparation

Guidance on checking parts, tools, and setting up the assembly area.

STEP 17 Wall Stud Safety Bracket Instructions

Step 17.1: Attach Bracket to Wall

Attach bracket 'II' to the wall stud using wood screws 'HH'.

Step 17.2: Attach Bracket to Dresser

Secure second bracket 'II' to the dresser top's back face using 'GG' screws.

Step 17.3: Attach Safety Strap

Thread and tighten safety strap 'JJ' through both mounted brackets.

Maintenance Cleaning and Storage

Maintenance

Periodically check furniture for loose parts, damage, or sharp edges.

Cleaning

Clean surfaces with a mild soap solution and soft cloths, avoid abrasives.

Storage

Store furniture with care regarding temperature and humidity.